Browsing 2020 by Issue Date

Sort by: Order: Results:

  • Apprоximate main value perfоrmance analysis оf cоmputing prоcess using shpn with fuzzy parameters 
    GUŢULEAC, Emilian; ZAPOROJAN, Sergiu; MORARU, Victor; SCLIFOS, Alexei; FURTUNĂ, Andrei (Tehnica UTM, 2020)
    Stochastic fluid models are a class of analytic models that have recently drawn the attention of many researchers for the modeling and performance evaluation of complex computer systems and networks (CSN). In this paper ...
  • Quality of services in MPLS networks 
    ȚURCANU, Dinu (Tehnica UTM, 2020)
    As traffic networks have become increasingly complex, there has been a need to migrate from circuits to packet-based networks. MPLS is a promising solution for the growing number of applications that require different QoS ...
  • Methodological aspects of real-time PCR usage in acetobacter detection 
    BOISTEAN, Alina; CHIRSANOVA, Aurica; ZGARDAN, Dan; MITINA, Irina; GAINA, Boris (Tehnica UTM, 2020)
    Acetic acid bacteria occur in sugar and alcoholised, slightly acid niches such as flowers, fruits, beer, wine, cider, vinegar, souring fruit juices and honey. On these substrates they oxidize the sugars and alcohols, ...
  • Detection and quantification of mycotoxigenic fungi in maize by real-time PCR 
    MITINA, Irina; MITIN, Valentin; TUMANOVA, Lidia; ZGARDAN, Dan; STURZA, Rodica (Tehnica UTM, 2020)
    The article focuses on real-time PCR detection and quantification of Fusarium spp., potential producer of class B fumonisin mycotoxins in mature corn kernels using primers designed to genes FUM1 and FUM6, involved in ...
  • Rocker mechanism from classical to modern kinematical analysis 
    MALCOCI, Iulian; GUŢU, Marin (Tehnica UTM, 2020)
    Kinematical mechanism analysis is usually used for motion study or to simulate and analyse the movement of mechanical assemblies and the whole mechanism. In this paper we will consider kinematical analysis regarding the ...
  • Sensor for an automatic measurement of mechanical properties of recovered paper objects 
    KREBS, Tobias; SCHABEL, Samuel (Tehnica UTM, 2020)
    Hârtia recuperată este cea mai importantă materie primă pentru industria hârtiei de astăzi, iar industria hârtiei este unul dintre precursorii economiei circulare. Cu toate acestea, în ciuda istoriei îndelungate a reciclării, ...
  • Density of states for an electronic spectrum with a forbidden band 
    CASIAN, Anatolie; SANDULEAC, Ionel (Tehnica UTM, 2020)
    Quasi-one-dimensional organic crystals with high electrical conductivity at room temperature are prospect materials for thermoelectric applications. However, usually at some low temperature these materials manifest ...
  • Parameters estimation of received signal in single-frequency network DVB-T2 
    IACOB, Mihail; DEMCIUC, Yurie; AVRAM, Ion (Tehnica UTM, 2020)
    This paper deals with the quality parameters of a television terrestrial signal received in the service area of a single-frequency DVB-T2 network, operating in the SISO mode (Single Input Single Output). The aim of the ...
  • Combined automated installation deployment for milk cooling 
    DAICU, Anatolie; VOLCONOVICI, Augustin; CHIRSANOVA, Ala; VOLCONOVICI, Onorin; SLIPENCHI, Victorin; VOLCONOVICI, Ina (Tehnica UTM, 2020)
    The work was aimed to develop the structural and functional diagram, automatic graphs and operating algorithms of the natural and artificial cooling receiver/accumulator for milk chilling in the capacitive cooler with low ...
  • Microservice based system for paper documents counterfeit detection 
    OLEINIC, Serghei; BEŞLIU, Victor; SCOROHODOVA, Tatiana (Tehnica UTM, 2020)
    The anti-counterfeiting is an ongoing problem whose solution requires significant human and financial resources. Eventual additional expenses are reflected in the final price of a protected product that means the customers ...
  • Features of stress-strain behaviour of basalt fibre reinforced concrete beam structures 
    RUSU, Ion; KHUDOBYCH, Artur; TSELIKOVA, Alina; KARPIUK, Vasyl; KARPIUK, Irina; ZAVOLOKA, Michael (Tehnica UTM, 2020)
    The paper deals with the results of multi-method test studies of the bearing capacity, stress-strain behaviour and crack resistance of the 2000х200х100 mm reinforced concrete beams and basalt fibre reinforced concrete beams ...
  • Trace tool usability assessment of energy efficiency measures for local energy autonomy promotion 
    ARION, Valentin; BOROSAN, Constantin (Tehnica UTM, 2020)
    This paper addresses the local communities’ engagement towards the energy autonomy by promoting energy efficiency and massive use of renewable energy sources. Based on software called Tool for Rapid Assessment of City ...
  • Review on use of decision support systems in cyber risk management for critical infrastructures 
    BUZDUGAN, Aurelian (Tehnica UTM, 2020)
    This paper uses the systematic literature review methodology to identify, analyze and evaluate the state of the art on the use of decision support systems for cyber risk management in critical infrastructures. This type ...
  • Fuzzy functions of expert knowledge encapsulated within statistical workflow data 
    CARBUNE, Viorel (Tehnica UTM, 2020)
    Taking over the skills of the human expert will make it possible to develop decision-making algorithms in conditions of uncertainty for industrial applications. Fuzzy sets are used in different fields and estimating ...
  • Amplitude-time analysis of biomechanical patterns of human motions 
    DAVYDOVA, Nadezhda; LUKASHEVICH, Dmitry; BYKOV, Dmitry; VASIUK, Valery; OSIP, Anatoly (Tehnica UTM, 2020)
    Biomechanical analysis of motions solves the tasks of efficiency estimation of movement realization, search of technique optimal variants and tactics of motion performance, definition of a degree and reasons of not matching ...
  • Simulator of electrical characteristics of muscle tissue 
    KAMLACH, Pavel; SIDOROVICH, Anastasiya; KULIKOV, Mikalai; KAMLACH, Veranika; DAVYDOVA, Nadezhda (Tehnica UTM, 2020)
    A simulator of electrical characteristics of muscle tissue with lumped parameters in a magnetic field was developed. Studies have been carried out to determine the parameters of elements with lumped parameters. According ...
  • Application of DC motor as speed and direction control 
    MOHAPATRA, Badri Narayan; MOHAPATRA, Rashmita Kumari (Tehnica UTM, 2020)
    Motion control plays a vital role in industrial atomization. Application wise variety type of motors like DC, AC, stepper or servo are used. Because of easier control DC motors are very popular to the users, its application ...
  • Strength, cractic resistance and deformativity of reinforced concrete beams damaged by through cracks, reinforced carbon fiber 
    ANTONOVA, Diana; ZAVOLOKA, Michael; KARPIUK, Vasyl; KARPIUK, Irina; RUSU, Ion (Tehnica UTM, 2020)
    The article deals with the main results of experimental studies of strength, crack resistance and informational content of the diagonal and normal sections of common damaged and brought to the critical state of the first ...
  • Grounds stabilized with organic binders 
    BRAGUŢA, Eugeniu (Tehnica UTM, 2020)
    The paper presents the enzymatic stabilizers effect on grounds in the compaction process by vibration. It has been intended, by specific rheological modeling of the ground mixtures with organic additives, as well as by ...
  • Peculiarities of walnut oil state in some food emulsions 
    RADU, Oxana (Tehnica UTM, 2020)
    The replacing of traditional lipids with more health-promoting oils containing polyunsaturated fatty acids (PUFA) is a modern trend in food industry. The principles of emulsions formation containing walnut oil (up to 90% ...

Search DSpace


Browse

My Account