IRTUM – Institutional Repository of the Technical University of Moldova

Browsing Articole din publicaţii internaţionale by Title

Browsing Articole din publicaţii internaţionale by Title

Sort by: Order: Results:

  • GORNET, V.; SANDULACHI, E.; GORNET, E. (National Academy of Packaging, Plovdiv, 2013)
    This study includes the methodology of obtaining the functional products with high nutritional value. Nutritional quality of food is determined by: the content and quality of carbohydrates, proteins and lipids, content of ...
  • EDUARD, Monaico; GLEB, Colibaba; DMITRII, Nedeoglo; KORNELIUS, Nielsch (American Scientific Publishers, 2014)
    We report on a comparative study of the pore growth during anodization of a narrow-bandgap III–V compound (InAs), a medium-bandgap III–V one (InP) and wide-bandgap II–VI semiconductors (ZnSe and Zn0.4Cd0.6S). According to ...
  • MONAICO, E.; URSAKI, V. V.; TIGINYANU, I. M. (American Institute of Physics, 2006)
    Porous CdSe layers have been fabricated by anodic etching of n-type single crystalline substrates with different values of conductivity. The morphology and porosity of the layers thus produced were found to be controlled ...
  • MONAICO, E.; URSAKI, V. V.; URBIETA, A.; FERNÁNDEZ, P.; PIQUERAS, J.; BOYD, R. W.; TIGINYANU, I. M. (IOP Publishing, 2004)
    Porous CdSe layers have been produced by anodic etching of crystalline substrates in a HCl solution. Anodization under in situ UV illumination resulted in the formation of uniformly distributed parallel pores with a diameter ...
  • GRÖTTRUP, Jorit; SCHÜTT, Fabian; SMAZNA, Daria; LUPAN, Oleg; ADELUNG, Rainer; MISHRA, Yogendra Kumar (ELSEVIER, 2017)
    The present work demonstrates a very simple and unique strategy for efficient photocatalysis using ZnO ceramic nano- and microtetrapods synthesized by a flame transport synthesis approach. Due to their three-dimensional ...
  • ROKOSZ, K.; HRYNIEWICZ, T.; DUDEK, Ł.; PIETRZAK, K.; RAAEN, S.; MALORNY, W.; CIUPERCA, R. (IOP Publishing, 2019)
    The surface stereometry and chemical compositions of porous coatings obtained during Plasma Electrolytic Oxidation, PEO / (Micro Arc Oxidation, MAO) processes with use of impulse regime with different frequencies were the ...
  • LANGA, S.; TIGINYANU, I. M.; MONAICO, E.; FÖLL, H. (WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2011)
    In this work a morphological comparison of porous structures obtained by means of electrochemical etching in II-VI (ZnSe, CdSe) and III-V (InP, GaAs, GaP) semiconductors is presented. It is shown that in III-V semiconductors ...
  • FÖLL, H.; CARSTENSEN, J.; LANGA, S.; CHRISTOPHERSEN, M.; TIGINYANU, I. M. (WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2003)
    Pore formation in n-type III–V semiconductors will be discussed and compared to pore formation in silicon. While by now many different kinds of pores were produced in silicon, the “pore zoology” in III–Vs was rather limited ...
  • TIGINYANU, I. M.; KRAVETSKY, I. V.; LANGA, S.; MAROWSKY, G.; MONECKE, J.; FÖLL, H. (WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2003)
    Electrochemical etching is shown to represent a unique approach for tailoring linear and nonlinear optical properties of III–V compounds. We demonstrate that under defined etching conditions uniformly distributed pores ...
  • GERNGROSS, Mark-Daniel; SPRINCEAN, Veaceslav; LEISNER, Malte; CARSTENSEN, Jürgen; FÖLL, Helmut; TIGINYANU, Ion (The Electrochemical Society, 2011)
    We report on the fabrication of cheap piezoelectric porous InP templates by electrochemical etching and additional purely chemical post-etching and on the galvanic filling of the resulting nanopore array with Ni-Fe using ...
  • MONAICO, Eduard; TIGINYANU, Ion; URSAKI, Veaceslav (IOP Publishing, 2020)
    In this review paper, we present a comparative analysis of the electrochemical dissolution of III–V (InP, GaAs, GaN), II–VI (ZnSe, CdSe) and SiC semiconductor compounds. The resulting morphologies are discussed, including ...
  • MONAICO, Eduard V.; MONAICO, Elena I.; URSAKI, Veaceslav V.; TIGINYANU, Ion M. (Wiley-VCH GmbH, Weinheim, 2023)
    Porous semiconductor compounds represent a class of materials which is under an intense research focus over the last years. Herein, morphologies and topologies produced by anodization in binary semiconductor compounds ...
  • BOIŞTEAN, Alina; CHIRSANOVA, Aurica (Institutul de Microbiologie şi Biotehnologie, 2018)
    The walnut has gained popularity because of its specific attractive organoleptic properties and high levels of essential fatty acids and bioactive components such as antioxidants. Walnut production is widely distributed ...
  • TIRSU, Mihai; POSTORONCA, Sveatoslav; MARTNOS, Ion (Academia de Studii Economice din Moldova, 2016)
    In the paper the solutions how to decrease the energy consumption for the most common types of buildings in urban areas of The Republic of Moldova using the modern practice of improving energy efficiency are shown. Here ...
  • GAPONENKO, Sergey V.; MONAICO, Eduard; SERGENTU, Vladimir V.; PRISLOPSKI, Sergey Ya.; TIGINYANU, Ion M. (IOP Publishing, 2018)
    We report on anomalous light retroreflection from strongly absorbing nanoporous semiconductor materials, GaAs and InP, with strongly polarized retroreflected light with linear polarization coinciding with that of incident ...
  • DIDORUC, S. (Національна Академія Аграрних Наук України, 2022)
    Goal. The purpose of the study is to assess the optimal age when using rabbits in reproduction on the basis of morphometric analysis of segments of the reproductive system.
  • ERRANDONEA, D.; KUMAR, Ravhi S.; MANJÓN, F. J.; URSAKI, V. V.; RUSU, E. V. (American Physical Society, 2009)
    Room temperature angle-dispersive x-ray diffraction measurements on spinel ZnGa2O4 up to 56 GPa show evidence of two structural phase transformations. At 31.2 GPa, ZnGa2O4 undergoes a transition from the cubic spinel ...
  • BOSTAN, V.; HAN, W.; REDDY, B. D. (Elsevier, 2003)
    This chapter derives the posteriori error estimates for the finite element approximation of elliptic variational inequalities of the second kind, by using the duality theory in convex analysis. An example in which the ...
  • BOSTAN, Viorel; HAN, Weimin (Elsevier, 2006)
    In this paper, we derive and analyze a residual type a posteriori error estimator for finite element approximations of a frictional contact problem for linearized elastic materials. The reliability of the estimator is ...
  • BOSTAN, Viorel; HAN, Weimin; REDDY, B. D. (Elsevier, 2005)
    In this paper, we perform an a posteriori error analysis for adaptive finite element solutions of elliptic variational inequalities of the second kind. A general framework for a posteriori error estimates is established ...

Search DSpace


Browse

My Account