IRTUM – Institutional Repository of the Technical University of Moldova

Thermoelectric Properties of Wires Bi2Te3 in the Glass Coating p and n Type

Show simple item record

dc.contributor.author MEGLEI, Dragosh
dc.contributor.author CUROSHU, Nikolai
dc.contributor.author STICH, Ivan
dc.date.accessioned 2019-11-06T12:47:19Z
dc.date.available 2019-11-06T12:47:19Z
dc.date.issued 2011
dc.identifier.citation MEGLEI, Dragosh, CUROSHU, Nikolai, STICH, Ivan. Thermoelectric Properties of Wires Bi2Te3 in the Glass Coating p and n Type. In: Microelectronics and Computer Science: proc. of the 7th intern. Conf., September 22-24, 2011. Chişinău, 2011, vol. 1, pp. 84-86. ISBN 978-9975-45-174-1. en_US
dc.identifier.isbn 978-9975-45-174-1
dc.identifier.uri http://repository.utm.md/handle/5014/6239
dc.description.abstract The aim of our research was to prepare micro- and nanowires of n- and p-type Bi2Te3 in glass insulation and to study their thermoelectric properties as a function of heat treatment, i.e., annealing, recrystallization, and wire diameter. The n- and p-type Bi2Te3 wires in glass insulation were prepared via liquid-phase casting through heating a glass tube containing the Bi2Te3 material of the appropriate composition using an outer furnace. For the first time, by re-drawing wires vitrified Bi2Te3 were obtained with the wires diameter up to 1 mkm. Due to the fact that the resistivity of the thin wires (d = 2 mkm) is almost an order of magnitude smaller than in the wires of p-type Bi2Te3 (d> 50 mkm), Power factor= α2σ at 300 K = 3,5*10-5 W/cm*K2 exceeds the maximum P.f= 1,2*10-5 W/cm*K2, obtained in wires with d> 50 mkm, even after additional annealing for 24 hours. It has been shown that the isothermal annealing increases both thermopower α and resistivity ρ in the samples of hole conductivity; unlike p-type, the parameters α and ρ vary only slightly after annealing. The parameters of the annealed samples hardly changed during the entire test period. Therefore, it is recommended to subject Bi2Te3 wires in glass insulation to an additional long-term annealing at appropriate temperatures in the case of their use in thermoelectric energy converters. en_US
dc.language.iso en en_US
dc.publisher Technical University of Moldova en_US
dc.rights Attribution-NonCommercial-NoDerivs 3.0 United States *
dc.rights.uri http://creativecommons.org/licenses/by-nc-nd/3.0/us/ *
dc.subject wires en_US
dc.subject microwires en_US
dc.subject annealing en_US
dc.title Thermoelectric Properties of Wires Bi2Te3 in the Glass Coating p and n Type en_US
dc.type Article en_US


Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 United States Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 United States

Search DSpace


Browse

My Account