Journal of Engineering Science: Recent submissions

  • TURCANU, Adrian; NUCĂ, Ilie (Technical University of Moldova, 2024)
    The paper explores the energy efficiency of general-purpose installations, particularly the equipment used in the espresso coffee production process, and the unique functions of hydraulic systems. By implementing eco-design ...
  • RUSEVA, Olga; COVALIOV, Eugenia; RESITCA, Vladislav; DESEATNICOVA, Olga; CAPCANARI, Tatiana; SUHODOL, Natalia (Technical University of Moldova, 2024)
    Nowadays, grapes represent the third most widely cultivated horticulture crop in the world. For the Republic of Moldova, grapes have been recognized as the most culturally important crop. About 70% of the total production ...
  • FEI, Wang; MEILING, Yao; GHEORGHE, Arpentin (Technical University of Moldova, 2024)
    This study delves into the intricate realm of Moldovan winemaking, focusing on the iconic Fetească Neagră grape variety. The research highlights the importance of indigenous grape varieties in shaping a unique wine identity ...
  • ERŞOVA, Svetlana; SUHOVICI, Daria; CESKO, Tatiana; BARBAROȘ, Maria-Marcela; POPESCU, Liliana; GHENDOV-MOSANU, Aliona (Technical University of Moldova, 2024)
    This article aimed to review the recent literature on the characterization of dietary fibers and their role in the human body, focusing on the methods of extraction of dietary fibers from agro-food waste as well as their ...
  • LITRA, Dinu; CHIRIAC, Maxim; LUPAN, Cristian; LUPAN, Oleg (Technical University of Moldova, 2024)
    The aim of this study was to develop and characterize CuO/Cu2O functionalized with AgPt nanostructures for gas sensing applications. Environmental pollution remains a pressing global concern, requiring effective detection ...
  • ȚURCAN, Vadim; ȘTASCOV, Mihail; CUTIA, Evgheni (Technical University of Moldova, 2024)
    The evaluation of seismic forces is very important for the design of all types of structures. In the present, Republic of Moldova is in a period of transition in the construction industry from the national design norms to ...
  • DOBRESCU, Cornelia-Florentina; BRAGUȚA, Eugeniu; HAREA, Olga (Technical University of Moldova, 2024)
    The analysis of the current state of applications and the results of studies carried out at international level have led to the approach of an eco-efficient methodology for the recovery of waste generated from construction ...
  • VIDIBORSCHII, Vladimir (Technical University of Moldova, 2024)
    Scientific and technical innovations done since 1960s resulted in successful development and implementation in medical practice active implantable devices. Most of them are using traditional chemical batteries with limited ...
  • BOLUN, Ion (Technical University of Moldova, 2024)
    By combining the Median-of-three and Regrouping-3 quicksort methods, the Joint quicksort is proposed, largely free from the shortcomings of the first two. For example, the time complexity of Joint quicksort, in case of ...
  • GARSTEA, Nina (Technical University of Moldova, 2024)
    Transport is in continuous evolution, regardless of the activity sector. Road transport faces various obstacles, and their management is a crucial part of planning and executing bulk transport operations. One of the main ...
  • COJOCARI, Daniela; GHENDOV-MOSANU, Aliona; STURZA, Rodica (Technical University of Moldova, 2023)
    The increase in the resistance of microorganisms to chemical substances and conventional drugs presents a serious and obvious problem worldwide, which has determined numerous researches aimed at the identification of new ...
  • BORTA, Ana-Maria; STURZA, Rodica (Technical University of Moldova, 2023)
    The article reviews the conventional (composting, landspreading, tartaric acid, and grapeseed oil production) and novel ways of winemaking by-products biomass conversion with the manufacturing of value-added products to ...
  • MAZUR, Mihail; BULGARU, Viorica; CELAC, Valentin; ŞENSOY, Ilkay; GHENDOV-MOSANU, Aliona (Technical University of Moldova, 2023)
    Nowadays there is a high concern with newly-identified protein sources to substitute all kinds of proteins derived from animals. The food industry faces a challenge to produce quality food products that can feed more than ...
  • CADAR, Rodica Dorina; BOITOR, Rozalia Melania; DRAGOMIR, Mihai Liviu (Technical University of Moldova, 2023)
    The paper presents an example of successful reconversion of an industrial site located in the built-in area of Cluj-Napoca, Romania. This case study shows that land-use and transport integrated planning can be effectively ...
  • BĂJENESCU, Titu-Marius I. (Technical University of Moldova, 2023)
    Artificial intelligence (AI) is the ability of a machine to mimic human functions such as reasoning, learning, planning and creativity. AI enables technical systems to perceive the environment in which they operate, process ...
  • ȚURCANU, Dinu; ȚURCANU, Tatiana (Technical University of Moldova, 2023)
    The transmission of video stream over wireless networks is used by many applications and services, from the use of equipment in home communication networks to those carrying the video surveillance stream. Numerous technical ...
  • ZAPOROJAN, Sergiu; MUNTEANU, Eugeniu; LARIN, Vladimir; PAVEL, Victor; CHICU, Lilian (Technical University of Moldova, 2023)
    There are applications which require particular approaches for each of the used parts. The non-contact strain sensors based on microwires with positive magnetostriction requires specific technological processes starting ...
  • NAGPAL, Rajat; CHIRIAC, Maxim; SEREACOV, Alexandr; BIRNAZ, Adrian; ABABII, Nicolai; LUPAN, Cristian; BUZDUGAN, Artur; SANDU, Iulia; SIEBERT, Leonard; PAUPORTÉ, Thierry; LUPAN, Oleg (Technical University of Moldova, 2023)
    The aim of this study was to develop low-powered, highly selective UV sensor to continuously monitor personalized UV exposure as well as to study annealing effect on UV detection properties of the sensors. ZnO:Al structures ...
  • IATCHEVICI, Vadim; TOCA, Alexei; NITULENCO, Tatiana; STRONCEA, Aurel (Technical University of Moldova, 2023)
    Technological development is largely determined by technology transfer, which is conditioned by the absorption capacity of new technologies, and new technologies are deeply digitized technologies. Success depends on creating ...
  • LEALIN, Stanislav (Technical University of Moldova, 2023)
    The requirements for the quality, reliability, and cost-effectiveness of engineering products and engineering production itself are constantly improving. As a result, there is an increasing demand for the quality of design ...

Search DSpace


Browse

My Account