Nr. 2

Browse by

CONTENT

Author	Title	Page
BÂZU M.I. BĂJENESCU, Titu-Marius I.	Packaging of nanodevices and reliability	11
RUSU M.	Thresholding methods and quantitative evaluation of results	18
MORARU V. RUSU M.	Algorithm for linear pattern separation	26
MARDAR M.R.	Application of the method of quality functional deployment when developing a new extruded product	30
OPREA D.	Vibration on the turbo-generator at the small power plant	34
MARUSIC G.	Study on numerical modeling of water quality in “river-type” systems	38
MALAI L.	Increasing the sustainability of bearings renovated with polymer composite materials	43
PEREBINOS M. ANDRIES I.	Optimal synthesis after geometry in antenna technique	53
POPOV V. URSU S. GHERŢA A.	Structural composition of red wines determined by the colour of bottle	46
GALBINEAN S	Calculation errors of the plates using finite element method	64
MALAI L.	The choice and optimization of a composite material used to renovate the bearing-type joints	67
BOSTAN V.	Micro hydro power station with hydrodynamic rotor	71
GOLDMAN A. FISHMAN G. TOPORET V. RASHCOVOI A.	Study of macropores and cracks in structural lightweight concrete	82
ZUBRILINA Ya. LUPASHKU T. SHAMIS E.	Effective technologies of production of building materials and articles	87
DULGHERU V.	Religious freedom today - Emperor Constantine’s edict of Milan: 1700 years later	90
DULGHERU V.	The physics of creativity and the creativity of evolution	96
MANOLEA Gh.	Personalities from the meridians of the engineering universe	98

Recent Submissions

Personalities from the meridians of the engineering universe

MANOLEA, Gheorghe (Tehnical University of Moldova, 2013)
The physics of creativity and the creativity of evolution

DULGHERU, Valeriu (Tehnical University of Moldova, 2013)
Religious freedom today - Emperor Constantine’s edict of milan: 1700 years later

DULGHERU, Valeriu (Tehnical University of Moldova, 2013)
Effective technologies of production of building materials and articles

ZUBRILINA, Ya.; LUPASHKU, T.; SHAMIS, E. (Tehnical University of Moldova, 2013)

The work includes the summary data of new technologies of building materials and articles on basis of mineral bindings. The methods are tested in manufacturing environments on gypsum and gypsum-port land cement-active ...
Study of macropores and cracks in structural lightweight concrete

GOLDMAN, A.; TOPORET, V.; RASHCOVOI, A.; FISHMAN, G. (Tehnical University of Moldova, 2013)

Structural lightweight concrete named GFC (lightweight high strength concrete), has been developed as result of cooperation between the TUM and the Department of Civil Engineering in Ariel. Lightweight concrete usually ...
Micro-hydro power station with hydrodynamic rotor

BOSTAN, V. (Tehnical University of Moldova, 2013)

Systems for conversion of the kinetic energy of the free water flow into electric or mechanical energy are using turbines in the absence of dams, thus eliminating the negative environmental impacts such as noise pollution, ...
The choice and optimization of a composite material used to renovate the bearing-type joints

MALAI, L. (Tehnical University of Moldova, 2013)

The paper presents certain considerations regarding the choice and optimization of a composite material used to renovate the bearing-type joints. The polyamide PA 12 was used as matrix and was reinforced with molybdenum ...
Calculation errors of the plates using finite element method

GALBINEAN, S. (Tehnical University of Moldova, 2013)

This paper refers to errors and gaps in calculation of plates using finite element method. For research, as a model was chosen a rectangular plate with different conditions on boundary, with a uniformly distributed load ...
Structural composition of red wines determined by the color of bottle

POPOV, V.; URSU, S.; GHERŢA, A. (Tehnical University of Moldova, 2013)

This paper describes the experimental results regarding the evolution of structural composition of Merlot and Rară Neagră (Rare Black) red wines stored in green transparent bottles.
Optimal synthesis after geometry in antenna technique

PEREBINOS, M.; ANDRIES, I. (Tehnical University of Moldova, 2013)

Considering explicitly the functional electrodynamic relations between antenna geometry, excitation function, current distribution and antenna pattern, we have derived the strict synthesis problem model for geometrical ...
Increasing the sustainability of bearings renovated with polymer composite materials

MALAI, L. (Tehnical University of Moldova, 2013)

This paper is dedicated to increasing the level of reliability of bearing type joints refurbished with polymer composite materials intensively reinforced with polyamidepoxide material with hallow glass microspheres. It has ...
Study on numerical modeling of water quality in „river-type” systems

MARUSIC, G. (Tehnical University of Moldova, 2013)

This paper presents bibliographic research on information systems used to determine water quality in "river-type" systems. It discusses the types of programs that can be used in this way. It highlights the most optimal, ...
Vibration on the turbo-generator at the small power plant

OPREA, D. (Tehnical University of Moldova, 2013)

All rotating equipment vibrates to some degree, but as older bearings and components reach the end of their product life, they begin to vibrate more dramatically and in distinct ways. Ongoing monitoring of equipment allows ...
Application of the method of quality functional deployment when developing a new extruded product

MARDAR, M. R. (Tehnical University of Moldova, 2013)

Application of the method of quality functional deployment, when developing a new extruded product, has been considered in the article. On the basis of the methodology of QFD, the quality characteristics of the developed ...
Algorithm for linear pattern separation

MORARU, V.; RUSU, M. (Tehnical University of Moldova, 2013)

This paper is dedicated to the problem of linear separation of two data sets. We presented an effective procedure to simplify the way of solving a problem with system of equations.
Thresholding methods and quantitative evaluation of results

RUSU, M. (Tehnical University of Moldova, 2013)

This paper describes the basic principle of thresholding techniques, mentioning some reference methods. The segmentation method proposed in previous works is evaluated objectively and compared with other methods from the ...
Packaging of nanodevices and reliability

BÂZU, M.I.; BĂJENESCU, Titu-Marius I. (Tehnical University of Moldova, 2013)

A scientific and technical revolution has begun that is based upon the ability to systematically organize and manipulate matter on the nanometer length scale, but the nanodevices packaging is an important source of failure ...

Nr. 2

Nr. 2

Browse by

CONTENT

Recent Submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account

Discover

Author

Subject

Date Issued

Has File(s)

RSS Feeds